Compact high-definition reversing camera for Fiat Ducato III: X250/X251, 2006 - 2014; X290, 2014 - 2021; series 8, from Q3 2021, Citroën Jumper II, 250/250D/250L, from 2006, Peugeot Boxer, 250/251, from 2006, Opel Movano, type C (from 2021)
- System design with integration of the original brake light (ABE/vehicle approval remains in place)
- Cam1 sensor with 50° and Cam2 sensor with 100° horizontal viewing angle
- Manually adjustable vertical image detail from Cam2
- IR-LED lighting with dynamic LDR brightness control for Cam2
- Integrated microphone (Cam2)
- 3-piece detachable system cable with 6-PIN connectors, suitable for direct connection to the DOMETIC/WAECO system cable pre-installed in the vehicle
- Injection-moulded plastic main body with stainless steel mounting studs
TECHNICAL SPECIFICATIONS
- Image sensor Cam1 / Cam2: Pixelplus PC3089
- Image sensor type: 1/3/8.5 mm CMOS sensor
- TV system: NTSC / 60 fps
- Viewing angle Cam1 / Cam2: 50° / 100° horizontally
- Native sensor SoC pixel resolution: 756 (H) x 504 (V) pixels
- Image-relevant pixel resolution: 720 (H) x 480 (V) pixels
- Focal length of lens Cam1 / Cam2: f4.2 / f2.0
- Refresh rate: 60 fields/sec.
- Signal to noise ratio: >47 dB
- Dynamic contrast: >62dB
- Light sensitivity: 0.5 Lux/F1.2/50IRE - 0 Lux with IR LED On
- Video output: CVBS
- White balance: automatic
- Exposure compensation: automatic
- Gamma correction: 0.45
- Brightness balance: automatic
- Synchronisation: automatic
- Power supply: 12 DCV (6 V - 16 V)
- Total power consumption (@12 V DC): 80 mA ±10 mA total for Cam1 + Cam2
- Protection class: IP68
- Operating temperature: -20°C to approx. +70°C
Contents:
Including camera unit with sensors and 30 cm cable, 11 m long main cable, 25 cm long cable end piece for connection to the control unit, 2 studs for mounting the original rear light reflector on the vehicle
