The extremely robust and high-quality RAV-MD2 double shutter reversing camera can be used on vehicles in many industries thanks to various mounting options, and is also protected against high-pressure cleaning. With our cameras, you can upgrade multimedia systems and standard OEM navigation systems from numerous manufacturers to a fully-fledged video system. You can get the right adapter for almost every monitor or vehicle model.
- Constructed according to degree of protection IP69K, the highest
- protection standards for components on vehicles
- Protection against water in high-pressure cleaners
- Protection against permanent immersion
- Protection against foreign bodies: fully dust-tight
- Protection against contact/vibrations
- Use of the highest quality Sony CCD electronics
- Outstanding resolution: 610,000 pixels with 700 TV lines
- Image sensor: High quality Sony 810 CCD sensor
- Image size: 1/3 inch
- Excellent infrared LEDs guarantee a perfect picture even in the dark
- Night vision up to 12 m
- Powder-coated die-cast aluminium housing, feet and sun protection panels, corrosion-protected
- Waterproof connectors
- Photosensitivity 0 lux
- Vibration resistant up to 7G
- Shockproof up to 100G
- Automatic backlight compensation
- Automatic brightness balance and white balance
- Camera 2 focal length: 2.9 mm, F5.5
- Power consumption: < 4 W
- 150° viewing angle for close range and 60° for far range
- No voltage connection required at the rear of the vehicle
- Signal-to-noise ratio: > 50 dB with automatic gain control
- Video signal output: 1 Vp-p, 75 ohms
- Power supply: 9–32 V +/-10%
- Power consumption: < 2.0 W per camera
- Dynamic range: 120 dB
- Operating temperature range: -30°C to 70°C
- Standing temperature range: -40°C to 80°C
- Camera image can be mirrored
- Built-in microphone
- Heating against condensation, anti-fog lotus coating
- Camera 1 focal length: 2.6 mm, F2.0
- Resolution: 610,000 px
- Operating voltage: 9–32 V DC
Contents:
Includes colour reversing camera (9 - 32 V)
20 meter connection cable, Y camera adapter
Sealing tape
Sealing rings for the cable bushing
Cinch to Cinch cable
2 4pin CGS to 6pin adapters
3 replacement wiper blades, shockproof up to 100G
4 metal screws
4 plastic screws
4 fine thread screws M5
