Tarvikud

ZENEC's ZE-RVSC62-MK2 reversing camera has been specially developed for use in the motor home sector - motorhomes, caravans, vans, trailers - and impresses with its innovative design and practical features.
The ZE-RVSC62-MK2, in a discreet silver finish, has a corrosion-resistant die-cast aluminium housing. The use of high-quality materials in combination with the clever design in accordance with protection class IP69K, the highest protection standard for protection against contact, foreign bodies, water and moisture, guarantees high weather resistance and a long service life.
The compact, high-resolution reversing camera is equipped with a high-quality SONY CMOS camera sensor, which can also capture very low-light situations thanks to its high sensitivity. Powerful night vision IR LEDs, which illuminate the area behind the motorhome, guarantee excellent visibility even in the dark. Switching between day and night mode is automatic.
With a viewing angle of 170ø diagonally, this reversing camera offers a very good overview when manoeuvring. The ZE-RVSC62-MK2 has an integrated waterproof microphone so that you can hear what is happening behind the vehicle at the same time.
The ZE-RVSC62-MK2 can be combined with a variety of multimedia and sat nav systems or monitors in normal operation or by image inversion. Dimensions (H x W x D): 39 x 30 x 40 mm, scope of delivery: camera, main extension cable (15 m) incl. HU side connections, mounting screws, mounting accessories and mounting instructions.

Features:

Compact, high-resolution reversing camera
Automatic day and night mode with four IR night vision LEDs
Built-in microphone
Normal or mirrored image output
Die-cast aluminium housing

Technical specifications:

Camera system: 6.09 mm SONY IMX225LQR CMOS sensor
Focal length lens: f 2.3
TV system: NTSC / 30 fps
Viewing angle: 170ø (D) x 135ø (H) x 90ø (V)
Native sensor resolution: 1305 (H) x 977 (V) pixels
Output signal resolution: > 420 TV lines
Signal-to-noise ratio: > 48 dB
Light sensitivity: 0.3 lux
Video output: 1.0 Vp-p, 75 Ohm CVBS
Gamma correction: 0.45
White balance, exposure compensation, brightness compensation, synchronisation: Automatic
Power supply: DC 6 - 24 V
Power consumption: 70 mA @12 V DC, ? 840 mW
Protection class: IP69K
Operating temperature: -30ø C to approx. +75ø
Dimensions (H x W x D): 39 x 30 x 40 mm

Scope of delivery
Camera
Main extension cable (15 m) incl. HU side connections
Mounting screws
Mounting accessories
Mounting instructions